Supplier of ASME SA240 SS 316 Coil and Strip
Check ASTM A240 Type 316 Foil and Hot Rolled Plate Specifications
ASTM A240 Type 316 Stainless Steel Sheet
SS 316 Plate
ASTM A240 Type 316 Coil
Table of Content
- Specification Format of ASTM A240 Stainless Steel 316 Sheet
- Frequently Used Stainless Steel 316 Plate Types
- Sizes of SS 316 Plate
- Dimensional Chart of AISI 316 Stainless Steel Sheet
- ASTM A240 Type 316 Coil Chemical Compatibility
- 316 Stainless Steel Plate Mechanical Characteristics
- UNS S31600 Strips Material Equivalent
- 316 SS Sheet physical Properties
- Thermal Properties of DIN 1.4401 Hot Rolled Plates
- ASTM A240 Grade 316 Shim Sheets Price
- AFNOR Z7CND17‐11‐02 SS Foil Uses
- Weight of SUS 316 Cold Rolled Plates
Specification Format of ASTM A240 Stainless Steel 316 Sheet
| Product Type | SS 316 Sheet, SS 316 Plate |
|---|---|
| Specification and Material Grade | ASTM A240 / ASME SA240 Grade 316 |
| Tolerances (thickness & width) |
|
| Americam / European Standard |
|
| Available Sizes |
|
| Thickness | 0.1 to 100 mm Thk |
| Width | 10-2500mm |
| Length | 2m, 2.44m, 3m, or as required |
| Finish | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
| Form | Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
Frequently Used Stainless Steel 316 Plate Types
Corrosion Resistant Polish Flat Stainless Steel Sheet Plate 316
4*8 Grade 316 Stainless Steel Flat Sheet Plate
316 2b Stainless Steel Sheet 4*8 4mm Plate
316 Rose Gold Hairline Stainless Steel Sheet Plate
316 Stainless Steel Checkered Plate
316 Blue Mirror Decorative Stainless Steel Diamond Plate
Aisi 316 Cold Rolled 8k Mirror Finished Stainless Steel Plate
Stainless Steel Sheet 316 Mirror Finish
316 Stainless Steel Coil
Cold Rolled Price 1mm Thick Sheet 316 Stainless Steel Plate
Stockist of UNS S31600 Strip Tape, JIS SUS 316 Cold Rolled Plates Sizes
Sizes of SS 316 Plate
| Size (in inches) | Size (in mm) |
|---|---|
| .125 | 3.18 |
| .134 | 3.40 |
| .156 | 3.96 |
| .187 | 4.75 |
| .250 | 6.35 |
| .312 | 7.92 |
| .375 | 9.53 |
| .500 | 12.7 |
| .600 | 15.9 |
| .750 | 19.1 |
| .875 | 22.2 |
| 1 | 25.4 |
| 1.125 | 28.6 |
| 1.250 | 31.8 |
| 1.500 | 38.1 |
| 1.750 | 44.5 |
| 2 | 50.8 |
| 2.500 | 63.5 |
| 3 | 76.2 |
316 Stainless Steel Sheet (1.4401) Polished 240 grit, white poly coat
| Size(mm) | Weight per sheet (kg) |
Size (mm) | Weight per sheet (kg) |
|---|---|---|---|
| 2500 x 1250 x 1.2 | 30.7 | 2500 x 1250 x 2.0 | 51.2 |
| 3000 x 1500 x 1.2 | 44.2 | 3000 x 1500 x 2.0 | 73.7 |
| 2500 x 1250 x 1.5 | 38.4 | 2500 x 1250 x 3.0 | 77.5 |
| 3000 x 1500 x 1.5 | 55.3 | 3000 x 1500 x 3.0 | 112.0 |
316 Stainless Steel Sheet 2B Finish
| Size (mm) | Weight per sheet (kg) |
Size (mm) | Weight per sheet (kg) |
|---|---|---|---|
| 2000 x1000 x0.7 | 11.5 | 3000 x1500 x1.5 | 55.3 |
| 2500 x1250 x0.7 | 17.9 | 2000 x1000 x2.0 | 32.7 |
| 2000 x1000 x0.9 | 14.7 | 2500 x1250 x2.0 | 51.2 |
| 2500 x1250 x0.9 | 23.0 | 3000 x1500 x2.0 | 73.7 |
| 2500 x1250 x1.0 | 25.6 | 2000 x1000 x2.5 | 40.9 |
| 2000 x1000 x1.2 | 19.6 | 2500 x1250 x2.5 | 63.9 |
| 2500 x1250 x1.2 | 30.7 | 3000 x1500 x2.5 | 92.1 |
| 3000 x1500 x1.2 | 44.2 | 2000 x1000 x3.0 | 49.6 |
| 2000 x1000 x1.5 | 24.6 | 2500 x1250 x3.0 | 77.5 |
| 2500 x1250 x1.5 | 38.4 | 3000 x1500 x3.0 | 112.0 |
Dimensional Chart of AISI 316 Stainless Steel Sheet
DIN 1.4401 Hot Rolled Plates Imperial Dimensions
| Plate Surface finish | Gauge (in) | Width (max in) |
|---|---|---|
| 2B : Cold rolled, heat treated, pickled, skin passed Plate | 10 to 24 | 72* |
| 2D : Cold rolled, heat treated, pickled plate | 12 to 24 | 60 |
| BA Mexinox only | 18 to 28 | 48 |
| Polished plate (not brushed) | 11 to 24 | 60 |
| Temper rolled plate Mexinox only | 13 to 29 | 48 |
SS 316 Plates Metric Dimensions
| Plate Surface finish | Thickness (mm) | Width (max mm) |
|---|---|---|
| 2B : Cold rolled, heat treated, pickled, skin passed plate | 0.25 to 8.0 | 2032 |
| 2D : Cold rolled, heat treated, pickled plate | 0.4 to 6.35 | 1524 |
| 2E : Cold rolled, heat treated, mechanically descaled plate | 0.4 to 8.0 | 2032 |
| 2R : Cold rolled, bright annealed plate | 0.25 to 3.5 | 1524 |
| 2H : Work hardened plate | 0.4 to 6.35 | 1524 |
| Polished, brushed plate | 0.5 to 4.0 | 1524 |
ASTM A240 Type 316 Coil Chemical Compatibility
| ASME SA 240 | C | Si | P | N | Mn | S | Mo | Cr | Ni |
|---|---|---|---|---|---|---|---|---|---|
| SA 240 316 | 0.08 max | 1.0 max | 0.045 max | 67.845 min | 2 max | 0.030 max | 2.00 – 3.00 | 16.00 – 18.00 | 11.00 – 14.00 |
316 Stainless Steel Plate Mechanical Characteristics
| ASTM A240 | Melting Range | Psi / Mpa - Tensile Strength | Psi / Mpa - Yield Strength (0.2%Offset) | Density | % Elongation |
|---|---|---|---|---|---|
| ASTM A240 Gr 316 | 1400 °C (2550 °F) | MPa – 515 Psi – 75000 |
MPa – 205 Psi – 30000 |
8.0 g/cm3 | 35 % |
UNS S31600 Strips Material Equivalent
| Grade | WERKSTOFF | UNS | BS | JIS | AFNOR | GOST | EN |
|---|---|---|---|---|---|---|---|
| SS 316 | 1.4401 / 1.4436 | S31600 | 316S31 / 316S33 | SUS 316 | Z7CND17‐11‐02 | – | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
316 SS Sheet physical Properties
| Grade | Density (kg/m3) |
Elastic Modulus (GPa) |
Mean Co-eff of Thermal Expansion (µm/m/°C) | Thermal Conductivity (W/m.K) |
Specific Heat 0-100°C (J/kg.K) |
Elec Resistivity (nΩ.m) |
|||
| 0-100°C | 0-315°C | 0-538°C | At 100°C | At 500°C | |||||
| 316 | 8000 | 193 | 15.9 | 16.2 | 17.5 | 16.3 | 21.5 | 500 | 740 |
Thermal Properties of DIN 1.4401 Hot Rolled Plates
| Temperature Range | |||
|---|---|---|---|
| °F | °C | in/in °F | cm/cm °C |
| 68-212 | 20-100 | 9.2 x 10-6 | 16.6 x 10-6 |
| 68-932 | 20-500 | 10.1 x 10-6 | 18.2 x 10-6 |
| 68-1832 | 20-1000 | 10.8 x 10-6 | 19.4 x 10-6 |
We provide Multiple Payment Options Of DIN 1.4401 Clad Plates, Contact US Today to Buy ASTM A240 Grade 316 Shim Sheets at best Price
ASTM A240 Grade 316 Shim Sheets Price
| 316 Stainless Steel Sheet Price List | ASME SA240 SS 316 Coils Prices |
| 4mm 6mm 8mm 10mm thick 4x8 316 stainless steel sheet | US $2.23-$2.28 / Kilogram |
| 316 grade stainless steel plate | US $2400-$2450 / Ton |
| 4 mirror finish 316 ss plate | US $2.09-$4.55 / Kilogram |
| stainless steel sheet 316 mirror finish | US $2500-$2600 / Ton |
AFNOR Z7CND17‐11‐02 SS Foil Uses
- Food processing
- Marine
- Chemical process vessels
- Pharmaceutical equipment
Refer AFNOR Z7CND17‐11‐02 Chequered Plate Weight Chart, Importer Of 1.4436 Mesh and Polished Plates
Weight of SUS 316 Cold Rolled Plates
| Thickness in Inches | Plate Weight per Unit Area | Density |
|---|---|---|
| 3/16 | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |