Monel Plate Supplier, Buy 2.4360 Sheet at Factory Price
Ready Stock of ASME SB127 Alloy 400 Coil, Check UNS N04400 Strip Specification
ASTM B127 UNS N04400 Monel 400 Plate
Nickel Alloy 400 Sheet
Monel 400 Strip
Monel Plate
Table of Content
- Specification Chart of Monel Plate
- Different Monel Sheet Types
- Price List of ASTM B127 Monel 400 Plate
- Monel 400 Sheet Mechanical Properties
- Thermal Properties of ASTM B127 UNS N04400 Strip
- Nickel Alloy 400 Sheet Tensile Strength
- Monel 400 Foil Tear
- 2.4360 Alloy 400 Plate Shear Strength
- ASME SB 127 UNS N04400 Coil Bearing
- Monel 400 ASTM B127 Hot Rolled Plate Charphy
- 400 Alloy Polished Plate Fatigue
- Monel 400 Strip Physical Composition Chart
- 400 Monel Cold Rolled Sheet Equivalent
- Size Chart of Monel 400 Shim Sheet
- Weight Chart of 400 Monel Cold Rolled Sheets
- ASTM B 127 Monel Polished Plate Chemical Structure
- Dimension of Alloy Monel Coil
Specification Chart of Monel Plate
| Monel 400 Steel Flat Plate Specifications | ASTM / ASME SB 127 |
|---|---|
| Size of UNS N04400 Plate | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Monel Grade 400 Shim Sheet Thickness in MM | 0.1mm to 12 mm Thk |
| 2.4360 Strip Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish of Alloy 400 2D Plate | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Monel 400 Nickel Polished Cold Drawn Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Different Monel Sheet Types
Monel 400 Clad Plate
Monel 400/ Nickel 400 Alloy Sheet and Coil and Plate
1219X2438X4.8mm, Monel 400 ASTM B127 Steel Plate
Monel 400 Nickel Alloy Sheet
Hot Cold Rolled Customized Monel 400 Nickel Alloy 4x8 Steel Sheet Plate
400 Monel Alloy Hot Rolled Plates
0.5*100 Alloy 400/ Monel 400 Nickel Foil/ Strip/ Coil
AMS 4544 Nickel alloy Monel 400 strip with thickness 0.10mm
UNS N04400/W.Nr.2.4360 12mm thick nickel alloy monel 400 plate
Stockist of JIS NW 4400 Foil, Check Nickel Alloy 400 Shim Sheet Price List
Price List of ASTM B127 Monel 400 Plate
| UNS N04400 Strip Price List |
Nickel Monel 400 Sheet Per Unit (INR) |
|---|---|
|
nickel copper Monel monel 400 sheet/plate |
$29.00-$32.00/ Kilogram |
|
ni plate n4 nickel steel plate monel 400 |
$26.00-$30.00/ Kilogram |
|
ASTM B127 monel 400 plate price |
$25.00-$50.00/ Kilogram |
|
UNS N04400 Monel 400 Nickel Alloy Sheet Plate |
$15.00-$20.00/ Kilogram |
Please note this is an approx Price of Alloy 400 Monel 4mm Thick Plate in Dubai, UAE. For final Monel 2.4360 Polish Plate Price List Please Call on +971 52 4402651 or drop an Email to sales@rmtdubai.com
Monel 400 Sheet Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 35000 , MPa – 240 | 40 % |
Thermal Properties of ASTM B127 UNS N04400 Strip
| Temperature | Mean Linear Expansion | Thermal Conductivity | Specific Heat | Electrical Resistivity | |||||
| °F | °C | in/in/°F x 10-6 | µm/m•°C | Btu-in/h/ft | W/m•°C | Btu/lb/°F | J/kg•°C | ohm-circ mil/ft | µΩ•m |
| -320 | -200 | - | - | - | - | - | - | 205 | 360 |
| -300 | -180 | 6.1 | 11.1 | 113 | 16.5 | 0.05 | 223 | - | - |
| -200 | -130 | 6.4 | 11.4 | 130 | 18.2 | 0.078 | 320 | - | - |
| -100 | -70 | -6.7 | 12.1 | 139 | 19.8 | 0.088 | 378 | - | - |
| 70 | 21 | - | - | 151 | 22 | 0.102 | 427 | 307 | 0.511 |
| 200 | 100 | 7.7 | 14.2 | 167 | 24 | 0.105 | 445 | 332 | 0.537 |
| 400 | 200 | 8.6 | 15.2 | 193 | 26.9 | 0.11 | 459 | 337 | 0.559 |
| 600 | 300 | 8.8 | 15.7 | 215 | 30.1 | 0.114 | 470 | 346 | 0.574 |
| 800 | 400 | 8.9 | 16.1 | 238 | 33.4 | - | - | 355 | 0.587 |
| 1000 | 500 | 9.1 | 16.3 | 238 | 36.5 | - | - | 367 | 0.603 |
| 1200 | 600 | 9.3 | 16.6 | 287 | 39.4 | - | - | 379 | 0.62 |
| 1400 | 700 | 9.6 | 17 | 311 | 42.4 | - | - | 391 | 0.639 |
| 1600 | 800 | 9.8 | 17.4 | 335d | 45.5d | - | - | 403 | 0.658 |
| 1800 | 900 | 10.0d | 17.7 | 360d | 48.8d | - | - | 415 | 0.675 |
| 2000 | 1000 | 10.3d | 18.1d | - | - | - | - | 427 | 0.692 |
Nickel Alloy 400 Sheet Tensile Strength
| Plate | |||||||
|---|---|---|---|---|---|---|---|
| Hot-Rolled, As-Rolled | 75-95 | 517-655 | 40-75 | 276-517 | 45-30 | 125-215 | 70-96 |
| Hot-Rolled, Annealed | 70-85 | 482-586 | 28-50 | 193-345 | 50-35 | 110-140 | 60-76 |
| Sheet | |||||||
| Annealed | 70-85 | 482-586 | 30-45 | 207-310 | 45-35 | - | 65-80 |
| Cold-Rolled, Hard | 100-120 | 690-827 | 90-110 | 621-758 | 15-2 | - | 93 min.a |
| Strip, Cold-Rolled | |||||||
| Annealed | 70-85 | 482-586 | 25-45 | 172-310 | 55-35 | - | 68 max.a |
| Spring Temper | 100-140 | 690-965 | 90-130 | 621-896 | 15-2 | - | 98 min.a |
Monel 400 Foil Tear
| Temperature, °F | Maximum Load, lb | Corrected Energy Values, ft-lb | Reduction of Thicknes,% | ||
| Initiation | Propagation | Total | |||
| Room | 32,340 | 715 | 2008 | 2723 | 57 |
| -184 | 39,000 | 649 | 2402 | 3051 | 50 |
| -238 | 42,000 | 795 | 2408 | 3203 | 51 |
| -320 | 47,800 | 899 | 2802 | 3701 | 46 |
| 41300 | 41,300 | 676 | 2138 | 2814 | 45 |
2.4360 Alloy 400 Plate Shear Strength
| Temper | Thickness, in | Shear Strength, ksi | Tensile Strength, ksi | Hardness, Rb | Ratio Shear Strength/ Tensile Strength |
| Hot-Rolled, Annealed | 0.042 | 48.75 | 73 | 65 | 0.67 |
| Cold-Rolled, Annealed | 0.029 | 49.5 | 76.8 | 60 | 0.65 |
ASME SB 127 UNS N04400 Coil Bearing
| Temper | Tensile Properties | Bearing Strength | Ratio, Bearing Strength/ | ||||
| Tensile Strength, ksi | Yield Strength (0.2% Off), ksi | Elongation, % | Yield Strength , ksi | Ultimate Strength , ksi | Yield Strength | Ultimate Strength | |
| Annealed | 70 | 27.2 | 42.5 | 58 | 145 | 2.13 | 2.07 |
| Half-Hard | 75.8 | 56.2 | 32 | 98.1 | 166 | 1.75 | 2.19 |
| Full-Hard | 117.8 | 110 | 5 | 162 | 211.5 | 1.47 | 1.79 |
Monel 400 ASTM B127 Hot Rolled Plate Charphy
| Temperature, °F | Notch | Orientation | Impact Strength, ft•lb |
| -423 | V | Long. | 141-219 |
| -423 | V | Trans. | 121-216 |
| -423 | Keyhole | Long. | 81-87 |
| -423 | Keyhole | Trans. | 72-75 |
| -440 | V | Long. | Unbroken |
| -440 | V | Trans. | 171-193 |
| -440 | Keyhole | Long. | 123-146 |
| -440 | Keyhole | Trans. | 91-116 |
400 Alloy Polished Plate Fatigue
| Temper | Fatigue Strength (108 cycles), ksi | Tensile Strength, ksi | Ratio, Fatigue Strength/ Tensile Strength |
| Annealed | 21 | 74.7 | 0.28 |
| Quarter-Hard | 24.5 | 76.5 | 0.32 |
| Half-Hard | 28.5 | 84.2 | 0.34 |
| Full-Hard | 39 | 126 | 0.31 |
| Full-Hard, Stress-Equalized (525°F/21 hr) | 41 | 133 | 0.31 |
Monel 400 Strip Physical Composition Chart
| Density (Kg.m-1) | 88.3 |
| Magnetic Permeability (20°C) | Could show magnetism as Curie temperature is close to room temperature |
| Curie Temperature (°C) | -7 TO +10 |
| Young’s Modulus (N/mm2) | 179 x 103 |
| Specific Heat, 20°C (J.Kg-1.°K-1) | 419 |
| Specific Electrical Resistance, 20°C (?O.m) | 0.51 |
| Thermal conductivity,20°C (W.m-1.°K-1) | 21.8 |
| Mean coefficient of thermal expansion, 20-100°C (°K-1) | 14.1 x 10-6 |
400 Monel Cold Rolled Sheet Equivalent
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Check Monel 400 Grade Cold Rolled Plate & Monel UNS 4400 Sheet Dimensions & Monel 4400 Sheet Price List, Monel 400 Round Bar Suppliers in UAE
Size Chart of Monel 400 Shim Sheet
| Size (in inches) | Size (in MM) |
|---|---|
| .125 | 3.18 |
| .134 | 3.40 |
| .156 | 3.96 |
| .187 | 4.75 |
| .250 | 6.35 |
| .312 | 7.92 |
| .375 | 9.53 |
| .500 | 12.7 |
| .600 | 15.9 |
| .750 | 19.1 |
| .875 | 22.2 |
| 1 | 25.4 |
| 1.125 | 28.6 |
| 1.250 | 31.8 |
| 1.500 | 38.1 |
| 1.750 | 44.5 |
| 2 | 50.8 |
| 2.500 | 63.5 |
| 3 | 76.2 |
Check Weight Chart & Composition of Gost МНЖМц 28-2,5-1,5 Hot Rolled and Cold Drawn Plates
Weight Chart of 400 Monel Cold Rolled Sheets
| Thickness in Inches | Plate Weight per Unit Area | Density |
|---|---|---|
| 3/16 | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
ASTM B 127 Monel Polished Plate Chemical Structure
| Grade | C | Mn | Si | Cu | S | Ti | Ni | Al | Fe |
| Monel 400 | 0.3 max | 2.0 max | 0.5 max | 28.0 – 34.0 | 0.02 max | – | 63.0 min | 0.50 max | 1.0 – 2.5 |
Uses of Monel Rod
- Monel 400 UNS N04400 Plate uses in Gas Processing
- UNS N04400 Monel 400 Foil uses in Specialty Chemicals
- Monel N04400 Plate uses in Pharmaceuticals
- Alloy Monel 400 Coil uses in Pharmaceutical Equipment
- Monel 400 Clad Plate uses in Off-Shore Oil Drilling
- 2.4360 Alloy 400 Sheet uses in Power Generation
- Monel Alloy 400 Plate uses in Petrochemicals
- Monel 400 ASTM B127 Hot Rolled Plate uses in Chemical Equipment
- Monel ASTM B127 Strip Tape uses in Condensers
- Alloy 400 Monel 2.4360 Slitting Coil uses in Pulp and Paper Industry
- Monel 400 Alloy Polished Plate uses in Sea Water Equipment
- 2.4360 Monel Sheet uses in Heat Exchangers
Importer of 400 Alloy Polished Plate, Check EN NiCu30Fe Perforated Sheet Dimension
Dimension of Alloy Monel Coil
Monel 400 Plate Imperial Dimensions
| Plate Surface finish | Gauge (in) | Width (max in) |
|---|---|---|
| 2B : Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| 2D : Cold rolled, heat treated, pickled plate | 12–24 | 60 |
| BA Mexinox only | 18–28 | 48 |
| Polished plate (not brushed) | 11–24 | 60 |
| Temper rolled plate Mexinox only | 13–29 | 48 |
400 Alloy Plate Metric Dimensions
| Plate Surface finish | Thickness (mm) | Width (max mm) |
|---|---|---|
| 2B : Cold rolled, heat treated, pickled, skin passed plate | 0.25–8.0 | 2032 |
| 2D : Cold rolled, heat treated, pickled plate | 0.4–6.35 | 1524 |
| 2E : Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2R : Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2H : Work hardened plate | 0.4–6.35 | 1524 |
| Polished, brushed plate | 0.5–4.0 | 1524 |
Stocking Distributor Of Monel 400 Plate Following Manufacturers in UAE
Stockist of ASTM B127 UNS N04400 Monel 400 Sheet in UAE