Low CS Bolts And Nuts at Factory Price
Check 4.6 Grade Threaded Rod and Stud Bolts Specification
Carbon Steel Fasteners
Carbon Steel Bolts and Nuts
CS 4.6 Grade Fasteners
Table of Content
- Material Specification Chart of Low Carbon Steel Fasteners
- Weight Chart of Carbon Steel Nuts
- Common types of Carbon Steel Bolts And Nuts
- Grade 5 Washers Weight in MM
- DIN Grade of ASTM A325 Grade 8.8 Fasteners
- Chemical Properties of 4.6 Grade CS Bolts
- 307A CS Fasteners Mechanical Properties Table
- Equivalent Grades of Medium Carbon Steel Screws
- Grades of Grade 5 CS Stud Bolt
- 307A CS Bolt Sizes
- Grade 2 Fasteners Price
- Grade A325 Bolts Weight in Kg
- Dimension Chart of Grade 8 Nut
Material Specification Chart of Low Carbon Steel Fasteners
Fasteners Material Specification | ASTM / ASME A/SA 193 / 194 |
---|---|
Standard | DIN, UNI, ISO, JIS, GB, IS, BS, ASME, ANSI, ASTM and all International Standards |
Fasteners/ Bolts Size | M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160 |
Length | 3 mm to 200 mm |
Bolts, Studs Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Fasteners Standard: | ANSI – American National Standards Institute
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
SCOPE |
|
Fasteners In Form of: | Hex, Square, Round, Threading as per Gauge Etc. |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
bolting Test Certificate: | Test Certificate as per EN 10204 / 3.1 |
Fasteners finishing: | Zinc (yellow, white, blue, black), black oxide, Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET |
Production process | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
bolting materials Surface Coating: |
All surface finishes offered including Geomet & PTFE, Galvanised, Zinc, Electroless Nickel, Sherardized, Dacromet |
Popular Types of Bolts | Hex Bolts, Flange Bolts, Hex Head Bolts, Lag Bolts, Square Bolts, Eye Bolts, U Bolts, T Bolts, Counter sunk Bolts etc. |
Popular Types of Nut | Hex Head Nut, Eye Nut, Dome Nut, Wing Nut, T Nut, Panel Nut, Lock Nut, Coupling Nut, Square Nut, Acorn Nut etc. |
Popular Types of Screw | Hex Head Cap Screws, Socket Set Screws, Anchor Screws, Blind Rivet, Socket Head Screws, Concrete Screws, Shoulder Screws, Panel Screws, Threaded Screws, Machine Screws etc. |
Popular Types of Washer | Machine Washers, Flat Washer, Star Washers, Sealing Washer, Lock Washer, Split Washer etc. |
Fasteners Packing: | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
Weight Chart of Carbon Steel Nuts
Size in Inches | Finished Hex | Heavy Hex | Finished Jam | Heavy Hex Jam | Square | Heavy Square |
1/2 | 3.75 | 6.54 | 2.62 | 4.00 | 5.78 | 7.87 |
5/8 | 7.33 | 11.9 | 4.93 | 6.96 | 10.8 | 14.3 |
3/4 | 11.9 | 19.3 | 7.70 | 11.0 | 15.4 | 23.5 |
7/8 | 19.0 | 29.7 | 12.0 | 16.7 | 24.5 | 36.2 |
1 | 28.3 | 42.5 | 17.6 | 23.5 | 36.3 | 51.5 |
11/8 | 40.3 | 59.2 | 24.7 | 32.4 | 52.5 | 72.4 |
11/4 | 54.3 | 78.6 | 36.1 | 45.8 | 70.6 | 95.5 |
13/8 | 73.0 | 102 | 47.9 | 59.3 | 94.5 | 125.0 |
11/2 | 94.3 | 131 | 60.9 | 74.8 | 122 | 161 |
15/8 | 162 | 91.6 | ||||
13/4 | 151 | 204 | 100 | 114 | ||
17/8 | 241 | 134 | ||||
2 | 224 | 299 | 140 | 165 | ||
21/4 | 419 | 227 | ||||
21/2 | 564 | 332 | ||||
23/4 | 738 | 429 | ||||
3 | 950 | 545 | ||||
31/4 | 1194 | 651 | ||||
31/2 | 1526 | 851 | ||||
33/4 | 1812 | 1005 | ||||
4 | 2180 | 1200 |
Common types of Carbon Steel Bolts And Nuts
grade 8 Carbon steel fasteners
Carbon Steel grade a325 threaded rod
Carbon steel carriage bolt washer
Carbon steel washers
Carbon steel flange hex bolt
8.8 Grade Bolt M12 ,Carbon Steel Eye bolt
DIN3570 carbon steel u bolt
Carbon Steel Hot Dip Galvanized Hex Bolt With Nut And Washer DIN933
307a bolt DIN933/911 Carbon Steel Nut and Bolt
Material M25 Carbon Steel Hex Nut
Carbon Steel grade 8.8 bolt and nut screw washer DIN931
DIN125 DIN127 Carbon Steel Flat Washer/ Spring Washer Gr4.8 8.8
Grade 5 Washers Weight in MM
APPROX. WEIGHT IN KGS FOR 100 NOS |
|||||||||||
SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
M-3 | 0.01 | 0.01 | |||||||||
M-4 | 0.02 | 0.02 | |||||||||
M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
M-14 | 0.82 | 0.60 | 0.38 | ||||||||
M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
M-18 | 1.27 | 0.97 | 0.66 | ||||||||
M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
M-52 | 31.90 | 33.00 | 18.20 | ||||||||
M-56 | 47.90 | 19.30 | |||||||||
M-60 | 51.60 | 20.30 | |||||||||
M-64 | 55.40 | 21.80 | |||||||||
M-68 | 57.40 | ||||||||||
M-72 | 63.40 | 24.00 |
DIN Grade of ASTM A325 Grade 8.8 Fasteners
Hexagon Bolts / Set Screws | Stud Bolts | Hexagon Nuts | Socket Cap screws |
---|---|---|---|
DIN 931 | BS4882 | DIN 934 | DIN 912 |
DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
BS 1768 | - | BS 1769 | DIN 7984 |
UNI 5731 | - | BS 1083 | ANSI B18.3 |
UNI 5739 | - | BS 3692 | ISO 4762 |
ISO 4014 | - | ISO 4032 | UNI 5931 |
ISO 4017 | - | ISO 4033 | BS 2470 |
BS 1769 | - | ANSI B18.2.2 | BS 4168 |
BS 3692 | - | - | - |
ANSI B18.2.1 | - | - | - |
Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
---|---|---|---|
DIN 913 | DIN 963 | DIN 938 | DIN 125 |
DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
DIN 916 | BS 1981 | BS 4439 | BS 3410 |
DIN 551 | BS 483 | BS 2693 | - |
DIN 553 | BS 2470 | - | Spring Washers |
DIN 438 | - | - | DIN 127 |
BS 4168 | - | - | BS 4464 |
- | - | - | BS 1802 |
Chemical Properties of 4.6 Grade CS Bolts
BS 970: 1955 |
Chemical Composition |
|||||||
C % |
Si % |
Mn % |
Ni % |
Cr/strong> % |
Mo % |
S % |
P % |
|
EN3B |
0.25Max |
0.35Max |
1.0Max |
– |
– |
– |
0.06Max |
0.06Max |
EN1A |
0.07/0.15 |
0.10Max. |
0.80/1.20 |
– |
– |
– |
0.20/0.30 |
0.07Max |
EN8 |
0.35/0.45 |
0.05/0.35 |
0.60/1.00 |
– |
– |
– |
0.06Max |
0.06Max |
EN9 |
0.50/0.60 |
0.05/0.35 |
0.50/0.80 |
– |
– |
– |
0.06Max |
0.06Max |
EN16 |
0.30/0.40 |
0.10/0.35 |
1.30/1.80 |
– |
– |
0.20/0.35 |
0.05Max |
0.05Max |
EN19 |
0.35/0.45 |
0.10/0.35 |
0.50/0.80 |
– |
0.90/1.50 |
0.20/0.40 |
0.05Max |
0.05Max |
EN24 |
0.35/0.45 |
0.10/0.35 |
0.45/0.70 |
1.30/1.80 |
0.90/1.40 |
0.20/0.35 |
0.05Max |
0.05Max |
BS 970 1991 |
BS 970 1955 EN |
AISI/SAE |
Werkstoff |
070M20 |
EN3B |
1020 |
1.0402 |
220M07 |
EN1A |
1113 |
1.0711 |
230M07 |
EN1A |
1213 |
1.0715 |
080M40 |
EN8 |
1040 |
1.1186 |
080A42 |
EN8D |
1042 |
– |
070M55 |
EN9 |
1055 |
1.0535 |
605M36 |
EN16 |
– |
– |
708M40 |
EN19 |
4140 |
1.7225 |
817M40 |
EN24 |
4340 |
1.6582 |
307A CS Fasteners Mechanical Properties Table
Grade |
Material |
Size Range |
Tensile Strength MPa min. |
Proof Strength MPa min. |
Core Rockwell Hardness |
Yield Strength MPa min. |
|
Min. |
Max. |
||||||
4.6 |
Low or Medium Carbon Steel |
M5 – M39 3/16” – 1-1/2” |
400 |
225 |
B67 |
B99.5 |
240 |
8.8 |
Medium Carbon Steel Q+T |
M5 – M16 3/16” – 5/8” M18 – M39 11/16” – 1-1/2” |
800 830 |
580 600 |
C22 C23 |
C32 C34 |
640 660 |
10.9 |
Alloy Steel Q+T |
M5 – M39 3/16” – 1-1/2” |
1040 |
830 |
C32 |
C39 |
940 |
12.9 |
Alloy Steel Q+T |
M1.6 – M39 #0 – 1-1/2” |
1220 |
970 |
C39 |
C44 |
1100 |
Equivalent Grades of Medium Carbon Steel Screws
High Temperature Bolting Steels | |||||
Grade |
Name |
Werkstoff Number |
ASTM |
BS |
Temperature Use |
Durehete 900 T22 |
42CrMo5.6 |
1.7233 |
– |
BS1506 631-850 |
Up to 480ºC |
Durehete 950 T31 |
40CrMoV4.6 |
1.7711 |
ASTM A193 B16 |
BS1506 671-850 |
Up to 510ºC |
Durehete 1055 T41 |
20CrMoVTiB4.10 |
1.7729 |
– |
BS1506 681-820 |
Up to 570ºC |
25CrMo4 |
– |
1.7218 |
– |
– |
Up to 400ºC |
21CrMoV5.7 |
– |
1.7709 |
– |
– |
Up to 540ºC |
42CrMo4 |
– |
1.7225 |
ASTM A193 B7 |
BS1506 630-860 |
Up to 450ºC |
Grades of Grade 5 CS Stud Bolt
US Bolts |
|||||
Grade and Material |
Nominal Size Range (inches) |
Mechanical Properties | |||
---|---|---|---|---|---|
Proof Load (psi) |
Min. Yield Strength (psi) |
Min. Tensile Strength (psi) |
|||
307ALow carbon steel |
1/4" thru 4" | N/A | N/A | 60,000 | |
Grade 2Low or medium carbon steel |
1/4" thru 3/4" | 55,000 | 57,000 | 74,000 | |
Over 3/4" thru 1-1/2" | 33,000 | 36,000 | 60,000 | ||
Grade 5Medium carbon steel, quenched and tempered |
1/4" thru 1" | 85,000 | 92,000 | 120,000 | |
Over 1" thru 1-1/2" | 74,000 | 81,000 | 105,000 | ||
Grade 8Medium carbon alloy steel, quenched and tempered |
1/4" thru 1-1/2" | 120,000 | 130,000 | 150,000 | |
Grade A325Carbon or alloy steel with or without boron |
1/2" thru 1-1/2" | 85,000 | 92,000 | 120,000 | |
18-8 & 316 StainlessSteel alloy with chromium and nickel |
All sizes thru 1" | N/A | 20,000 Min. 65,000 Typical | 65,000 Min. 100,000 – 150,000 Typical | |
651 Silicon bronzeAn alloy of mostly copper and tin with a small amount of silicon |
1/4" thru 3/4" | N/A | 55,000 | 70,000 | |
7/8" thru 1-1/2" | N/A | 40,000 | 55,000 | ||
Aluminum 2024Aluminum alloy with copper, magnesium and manganese; solution heat treated and age hardened |
All sizes | N/A | 36,000 | 55,000 | |
Metric Bolts |
|||||
Class and Material |
Nominal Size Range (mm) |
Mechanical Properties | |||
Proof Load (MPa) |
Min. Yield Strength (MPa) |
Min. Tensile Strength (MPa) |
|||
Class 8.8Medium carbon steel, quenched and tempered |
All sizes below 16mm | 580 | 640 |
800 |
|
16mm - 72mm | 600 | 660 | 830 | ||
Class 10.9Alloy steel, quenched and tempered |
5mm - 100mm | 830 | 940 |
1040 |
|
Class 12.9Alloy steel, quenched and tempered |
1.6mm - 100mm | 970 | 1100 |
1220 |
|
A-2 & A-4 StainlessSteel alloy with chromium and nickel |
All sizes thru 20mm | N/A | 210 Min. |
500 Min. |
Stockist of Medium Carbon Steel Screws, View Grade 307A Washer Material Sizes
307A CS Bolt Sizes
Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 |
Grade 2 Fasteners Price
Carbon Steel Fasteners Prices | ASTM A325 Grade 8.8 Fasteners Price List |
carbon steel bolt | Price US$ 0.50-US$ 5.00 / Piece |
carbon steel metric fasteners clamp u bolt with nut screw | Price US$ 0.30-US$ 0.50 / Piece |
Carbon Steel Zinc Plated U Bolts | Price US$ 0.01-US$ 0.05 / Piece |
Carbon Steel 12 point hex flange bolt | Price US$ 0.06-US$ 0.80 / Piece |
Din 912 Carbon Steel Pan Head Hex Socket Cap Screws and Fasteners | Price US$ 0.01-US$ 0.99 / Piece |
carbon steel screw eye bolt with wing nut | Price US$ 0.02-US$ 1.00 / Piece |
Check Weight Chart & Composition of Class 8.8 Anchor Bolts & Hex Head Cap Screws
Grade A325 Bolts Weight in Kg
MM THREADS AS PER IS 1363/67 | ||||||||||
APPROXIMATE WEIGHT IN KGS FOR 100 NOS | ||||||||||
LENGTH | DIAMETER | |||||||||
M 5 | M 6 | M 8 | M 10 | M 12 | M 14 | M 16 | M 18 | M 20 | M 22 | |
M 5 | M 6 | M 8 | M 10 | M 12 | M 14 | M 16 | M 18 | M 20 | M 22 | |
16 | 0.448 | 0.743 | 1.590 | 3.211 | - | - | - | - | - | - |
20 | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | - | - | - | - | - |
25 | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | - | - | - | - |
30 | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | - | 18.657 | - |
35 | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | - |
40 | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | - |
45 | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | - |
50 | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
55 | - | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 |
60 | - | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 |
65 | - | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 |
70 | - | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 |
75 | - | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 |
80 | - | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 |
90 | - | - | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 |
100 | - | - | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 |
110 | - | - | - | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 |
120 | - | - | - | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 |
130 | - | - | - | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 |
140 | - | - | - | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 |
150 | - | - | - | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 |
160 | - | - | - | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 |
170 | - | - | - | 12.500 | 18.116 | - | 32.680 | - | 53.191 | 64.935 |
180 | - | - | - | 13.123 | 19.011 | 26.882 | 34.247 | - | 55.556 | 67.568 |
190 | - | - | - | 13.736 | 19.920 | - | 35.971 | - | 58.140 | 70.423 |
200 | - | - | - | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 |
220 | - | - | - | 15.528 | 22.624 | - | 40.650 | - | 65.789 | 79.365 |
240 | - | - | - | 16.722 | 24.510 | - | 43.860 | - | 71.429 | 84.746 |
250 | - | - | - | 17.301 | 25.381 | - | 45.455 | - | 74.627 | 87.719 |
260 | - | - | - | 17.921 | 26.316 | - | 47.170 | - | 76.923 | 90.909 |
280 | - | - | - | 19.157 | 28.090 | - | 50.505 | - | 81.967 | 98.039 |
300 | - | - | - | 20.325 | 29.940 | - | 53.763 | - | 87.719 | 104.167 |
320 | - | - | - | - | 31.646 | - | 56.818 | - | 92.593 | - |
340 | - | - | - | - | 33.557 | - | 60.241 | - | 98.039 | - |
360 | - | - | - | - | 35.211 | - | 63.291 | - | 104.167 | - |
380 | - | - | - | - | 37.037 | - | 66.667 | - | 108.696 | - |
400 | - | - | - | - | 39.063 | - | 69.444 | - | 113.636 |
Importer of Grade A325 CS Hex Bolts, Check Grade 5 Hexagon Socket Head Cap Screw Dimension
Dimension Chart of Grade 8 Nut
Bolts Size Chart in Inches | A (max) | B | C (min) | D | E | F Thread Length for Bolts Length |
||
---|---|---|---|---|---|---|---|---|
max | min | 6" and shorter |
over 6" | |||||
1/4 | 0.260 | 3/8 | 0.498 | 11/64 | 0.03 | 0.01 | 0.750 | 1.000 |
5/16 | 0.324 | 1/2 | 0.665 | 13/64 | 0.03 | 0.01 | 0.875 | 1.125 |
3/8 | 0.388 | 9/16 | 0.747 | 1/4 | 0.03 | 0.01 | 1.000 | 1.250 |
7/16 | 0.452 | 5/8 | 0.828 | 19/64 | 0.03 | 0.01 | 1.125 | 1.375 |
1/2 | 0.515 | 3/4 | 0.995 | 21/64 | 0.03 | 0.01 | 1.250 | 1.500 |
5/8 | 0.642 | 15/16 | 1.244 | 27/64 | 0.06 | 0.02 | 1.500 | 1.750 |
3/4 | 0.768 | 1-1/8 | 1.494 | 1/2 | 0.06 | 0.02 | 1.750 | 2.000 |
7/8 | 0.895 | 1-5/16 | 1.742 | 19/32 | 0.06 | 0.02 | 2.000 | 2.250 |
1 | 1.022 | 1-1/2 | 1.991 | 21/32 | 0.09 | 0.03 | 2.250 | 2.500 |
1-1/8 | 1.149 | 1-11/16 | 2.239 | 3/4 | 0.09 | 0.03 | 2.500 | 2.750 |
1-1/4 | 1.277 | 1-7/8 | 2.489 | 27/32 | 0.09 | 0.03 | 2.750 | 3.000 |
1-3/8 | 1.404 | 2-1/16 | 2.738 | 29/32 | 0.09 | 0.03 | 3.000 | 3.250 |
1-1/2 | 1.531 | 2-1/4 | 2.986 | 1 | 0.09 | 0.03 | 3.250 | 3.500 |